Dont like the OEM rubber lens cap that came with your Bering Optics 25mm scope? Here's a must have product!
We found the OEM rubber lens cap to be difficult to install, especially in cold weather and there is no good place to store the cap when using the scope. We designed a flip open cap that solves all these issues. Firs we started with a well known and proven flip- open cap by Buttler Creek and then we modified it to fit perfectly on all the 25mm Bering Optics scopes. It is also designed to not interfere with the Focus ring or any focus lever you may currently have. Our flip-open cap also stays stationary when rotating the focus ring so the cap is not rotating when focusing. So, "Cut the Cord" (or cable in this case) and install our modified flip open cap.
Fits the following scopes:
Bering Optics Hogster Stimulus 19mm (BE43019)
Bering Optics Hogster Stimulus VR 19mm (BE43019VR)
Bering Optics Hogster 25mm (BE43025)
Bering Optics Hogster Vibe 25mm (BE43325)
Bering Optics Super Yoter R 25mm (BE46025)
Bering Optics Super Yoter R 25mm w/LaRue Tactical QD Mount (BE46025L)
A lens cap keeps dirt, rain and scratches off the objective lens when you're not looking through the scope. A flip cap like this one stays attached, so you open it with a thumb and never have to pocket a loose rubber cover in the dark.
No. Caps are sized to a specific objective, and a loose one falls off while a tight one won't go on. This cap is modified to fit the 19mm and 25mm Bering Optics scopes listed on this page, so check your model number first.
Start with your scope's model number. If it is a Bering Optics BE43019, BE43019VR, BE43025, BE43325, BE46025 or BE46025L, this flip cap fits. For other optics, our eye cups and lens caps section lists caps by model.