Watch the video Specs Overview
DNO Power Cord for Thermal Scopes and Monocular/Scanners using external Battery Packs. This power cord plugs into the USB port on your Battery and has a Type-C Magnetic Disconnect that goes into the scope or Monocular. The magnetic Port protects the cord from getting hit or bumped which can, and eventually will break the port in the scope. If that does happen it can be a very expensive repair not to mention the downtime waiting for repair. Don't Take a chance and get your scope protected with our Power Cord!
Note: If you are not sure which type of power connector your specific scope has, please select both style plugs in the options (see last 2 pictures for identification)
Please be aware that not all thermal scopes will accept the magnetic tip. It must be a port that is not recessed into the scope too deep or has a shroud around the outside of the port. If concerned about your specific application please contact us prior to purchasing.
This cable does not work on the following scopes.
USB Magnetic Power cord (12", Medium 18", 36" and 72")
12" cord is popular in applications where your battery sits in close proximity to the scope.
18" Cord is our most popular length and is included in our external battery pack kits. If you mount your battery pack as far forward on the rifle as possible this length cord will still make it back to the scope (in most situations)
36" cord is great for charging your scope in a vehicle or safe etc.
72" is also a good option for charging your scope on the rifle in your safe or when stored. This cables intended application is not for mounting on a firearm.
They are, and on a rifle they protect the scope better than a fixed cable. The magnetic tip breaks away when the cord is pulled or bumped, so the force goes into the magnet rather than the USB-C port inside your scope. Check your model against the list above first, because recessed or shrouded ports won't hold the tip.
Fit is the main drawback. The magnetic tip needs a port that sits close to the surface, so scopes with a deep or shrouded USB-C port can't use it. This cord does not work on AGM Varmint, several iRay models, NVision or Trijicon optics. Call us at (309) 781-8421 if you aren't sure about yours.
For running a scope off an external pack, a magnetic cable makes a lot of sense. You connect and disconnect at the magnet, so the scope's port takes almost no wear, and a snag in the brush pulls the tip free instead of cracking the port. The 18 inch length is the one we put in our battery pack kits.