1/4-20 Threaded D-Ring fits most monoculars on the market, and gives you a secure attachment point for your lanyard/neck strap
Note: this is for the D-Ring stud only. Please see Lanyards if you need one, there is an option for the D-Ring on the Lanyard page.
Fitment
*1/4-20 threads is the most popular for monoculars. If your Monocular has a threaded insert it is most likely 1/4-20 and these will fit, but if you have any questions please call.
Any lanyard or neck strap with a clip or loop that fits a D-ring will work. Our lanyard page lists straps sized for thermal monoculars, and you can add this D-ring as an option there so everything arrives together. Then the monocular hangs ready at your chest on a stalk.
It is the thread size: a 1/4-inch diameter screw with 20 threads per inch. It is the same thread used on camera tripod sockets and on the threaded insert of most monoculars. This D-ring fits every AGM Taipan, Pulsar Helion and Bering Optics Phenom, plus most other monoculars with that insert.
No. M4 is a metric thread about 4 mm across, and a 1/4-inch screw is about 6.35 mm, so the two won't thread into each other. If your monocular has a metric insert, this D-ring won't fit it. Call us at (309) 781-8421 and we will check your model before you order.