N-Vision NOX18 & NOX35 DNO Tactical Eye Cup and Diopter Focus Ring

Dark Night Outdoors (DNO) Tactical Eye cup for the NOX18 & NOX35. This eye cup incorporates a couple really nice features for thermals. It has a shutter door that opens giving full view of the screen when you push into the eye cup. when released it closes to conceal light from the screen, which can reflect back giving away your location before you get a shot off! the shutter also assists in keeping the lens clean and clear from debris. This eye cup also comes with a focus ring for the Diopter, which makes it much easier to focus. The tactical eye cup is made from a soft rubber that will not stiffen up in cold weather and will not get flimsy in warm weather. This is a great must have accessory!

Installation Instructions: Both the Eye cup and Focus Ring is a tight fit to prevent movement. The Focus ring needs to be installed first, I recommend turning on the scope, and focusing the diopter ring before installing the eye cup. when installing the eye cup, push it all the way up to the Focus ring. this will help keep the focus ring from inadvertently being moved. Keeping you in focus! The Tactical eye cup slides on and is a friction fit. Over time if installed and removed frequently the eye cup may become loose. We designed this to be a friction fit so there is no modification necessary to the scope nor will it scratch or damage the scope itself, so it does not void the warranty. 

Specification: Made from rubber material with multiple folds and an ergonomic eye cup, providing ample flexibility as comfortable cushion and protection for the eye area against recoil Use with optics to relieve eye strain by blocking glare or enhancing low light, and to improve focus on target by eliminating distractions from peripheral movement. Eye shade design enables quick eye positioning for proper eye relief and optic center alignment to speed up target acquisition and increase sighting accuracy

Please Note:

• This tactical eye cup DOES NOT install in the same grove as the OEM eye cup.
• Full view of Screen is visible when using this eye cup
• Shutter can be removed by cutting them out and is easy to do with any Exacto knife.
• Eye cup and Focus ring are a tight friction fit and can be difficult to install the first time
• If the eye cup is installed and removed frequently it can become loose. 

Compatible with the following scopes:

• N-Vision NOX18
• N-Vision NOX35

Note: Due to sanitary reasons Eyecups can not be returned.