Pair (2 batteries) 18500 Vapcell INR18500 K15 1500mAh 15A High Discharge Flat Top
Fits the Following Thermal Devices:
Specifications:
Typical Capacity: 1500 mAh
Minimum Capacity: 1400 mAh
Nominal Voltage: 3.6V
Discharge End Voltage: 2.5V
Standard Charge Current: 500mA
Charging Voltage: 4.20+-0.05V
Max. Continuous Discharging Current: 15A
Dimensions:
50.00mm (L) x 18.2 mm (D)
Max Weight: ~37g
Warnings:
-Do not overdischarge/overcharge
-Recharge drained batteries ASAP
-Do not short circuit
-Do not dispose of in fire
-Do not expose to extreme heat or water
-Please be familiar with handling lithium-ion batteries before purchase.
Please note: Due to the nature of this consumable product, no returns are allowed unless the product is defective upon receipt
Both of these iRay Bolt sights take an 18500 lithium-ion cell, and this flat-top Vapcell K15 pair is what we sell for them. Other scopes use different sizes, like CR123A, 18650 or a built-in pack, so check your manual or the battery door before you order.
An 18500 cell is about 18mm wide and 50mm long, which is where the name comes from. This Vapcell K15 measures 50.00mm long by 18.2mm across and weighs roughly 37g. It's shorter than an 18650, so the two can't swap in a compartment built for one size.
Every thermal scope needs power to run its sensor, processor and screen. Some use a built-in rechargeable pack, others take removable cells like this 18500, and many can run off an external battery too. Removable cells let you drop in a fresh one in the field instead of waiting on a charge.